Alignment Label Move

Moves a selection set of Station/Offset labels to a specified offset.

Keyboard Command: AliLabMov

Procedure:

1. Open the drawing containing the alignment station/offset labels.
2. Initiate the command from the menu, ribbon or command above.
3. Select the alignment to use by picking it.
4. Select the station/offset labels to move.
5. Choose the Offset or Segment method.
6. Specify the offset or pick the figure segment.

Notes:

• The offset method prompts for a numeric value, enter negative numbers for left, positive numbers for right.
• The segment method prompts for a (straight) segment.Pick any linear figure anywhere along the segment.