Label Curve Table

Places and manages (add, check, edit, find, renumber) curve table tags as well as placing the table in the drawing.

Keyboard Command: LabCrvTbl

• Add: Adds a new curve table tag to a curved object. After selecting a curved object, confirm the tag number to use.
• Check: Audits the curve table tags in the drawings, checking for duplicates.
• Edit: Select a curve table tag to change it's number value.
• Find: Finds a curve table tag based on it's number, zooming it to the center and marking it.
• Renumber: Renumbers a selection set of curve table tags based on a specified starting number.
• Place: Places a curve table in the drawing. If tags are modified you can update the table with the Update Linked Objects command.

Notes:

• When a tag block is placed on a polyline, maintain the insertion point of the tag block at a point along the polyline segment it was placed on.
• Tag blocks contain extended information that tells the object handle it was placed on. This means you cannot simply move/copy them to another location on a different object, you must use the Add tool to place a new tag on the other object(s).
• When a tag block is placed on a polyline, it's (nearest osnap) coordinate position is used to obtain the polyline segment references. This means you can move a tag along the segment to accommodate other objects, but don't move it onto another segment (unless that is the intention). Don't move curve tags onto straight segments and vice-versa.
• When a tag is placed on an arc object, the tag block insertion point does not have to reside on the object.