Points On Line

Creates points on the path between two chosen points with interpolated elevation.

Keyboard Command: PntAddLin

Procedure:

1. Initiate the tool.
2. Pick a beginning point (by node) or type in its number.
3. Pick or enter an ending point.
4. Enter the horizontal distance to create the point.
5. Repeat step 4 until complete, then press enter to end.

Notes:

• After picking the two points to define the line, the point numbers, slope, horizontal, and vertical distances are displayed.
• The points created do not have to lie between the chosen points. You can enter a negative distance to create a point back from the first point or a distance greater than the distance between the points to create a point beyond the second point.