Status Bar Reference Guide

Status Bar
Status Bar
Logo
Button to show or hide the toolbar
GPS receiver icon - can be clicked to bring up the Skyplot Monitor page
Bluetooth port icon
Radio Level = Weak - can be clicked to bring up the GPS Monitor page
Radio Level = Normal - can be clicked to bring up the GPS Monitor page
Radio Level = Strong - can be clicked to bring up the GPS Monitor page
_._ s
GPS RTK Delay
Streaming service is disconnected
Streaming service is connected
Reverse indicator
Battery indicator (will be filled based on percent of charge)
Battery is plugged in
Ethernet is connected
Cellular Signal Strength = Very Low
Cellular Signal Strength = Low
Cellular Signal Strength = Moderate/Acceptable
Cellular Signal Strength = Good
Cellular Signal Strength = Very Good
Distance sensor device is online
RTK Link Quality below 50%
RTK Link Quality between 50-74%
RTK Link Quality between 75-89%
RTK Link QUality between 90-100%
RTK Latency less than 75%
RTK Latency between 75-80%
RTK Latency between 80-90%
RTK Latency between 90-100%
Message Icon
There was a failure in file transfer

Note: The project name will be displayed to the right of these icons. In Operator Tools → Pile File Manager, if the "Use Pile Target Offset" option is enabled, the pile offset will be displayed on the right side of the status bar.

Button to open up the Admin Tools menu
Symbol will overlay one of the above icons to indicate where the problem resides