This command allows you to configure SurvPC with conventional GPS (GNSS) equipment with the purchase of the optional GPS drivers.
- Instrument Connect: (button). Common across the GPS interface is the Instrument Connect button that attempts to connect SurvPC to the instrument selected in the Current tab via the communication parameters established in the Comms tab. This action is similar to that of ✅ but leaves the GPS Rover interface open so that other parameters can be viewed or set.
The tabs shown are configured based on the selected instrument with the most common consisting of:
Note: It is recommended to go left to right through the tabs, from Current to Comms to Receiver to RTK, to ensure that all settings are correct, especially when configuring a new receiver for the first time.