This command allows you to configure SurvPC with a conventional two-man total-station (TS) or with a one-man robotic total-station (RTS) with the purchase of the optional RTS drivers.
- Instrument Connect: (button). Common across the Total Station interface is the Instrument Connect button that attempts to connect SurvPC to the instrument selected in the Current tab via the communication parameters established in the Comms tab. This action is similar to that of ✅ but leaves the Total Station interface open so that other parameters can be viewed or set.
The tabs shown are configured based on the selected instrument with the most common consisting of:
Note: It is recommended to go left to right through the tabs, from Current to Comms to Settings to Search, to ensure that all settings are correct, especially when configuring a new instrument for the first time.
[Robotic] Total Station Status Indicators
Based on the functionality of the connected piece of equipment, Total Station and Robotic Total Station indicators may appear during active measurement commands.
Tap them to arrive at the desired effect.