🔗

🔗SurvPC 30-day Evaluation Mode

Note: The steps below do not necessarily require an active Internet connection.

Similar to the functionality found in the Full User registration method, SurvPC provides a 30-day evaluation mode. Upon starting a non-serialized version of SurvPC, the following will appear:

  1. 🔗Enter SurvPC Serial Number: If you wish to operate in a 30-day evaluation mode, you will need to supply a serial number:
    Enter SurvPC Serial Number
    Enter SurvPC Serial Number
    Click Here

    If you don't already have one, tap Click Here (to get one via the Internet) to continue.

  2. 🔗Submit the requested information from the resulting web-site. An evaluation serial number will be returned to you for placement into SurvPC.
  3. 🔗Enter SurvPC Serial Number: Upon receipt of the evaluation serial number, enter it into the Serial Number field:
    Enter SurvPC Serial Number
    Enter SurvPC Serial Number
    OK

    Note: The serial number is not case-sensitive but does require the dash (-) separators.

    Tap OK to continue.

  4. 🔗SurvPC Status: Each time SurvPC is launched, it will summarize the amount of remaining time or function calls:
    30-day Eval Mode
    30-day Evaluation Mode
    OK

    Tap OK to continue.

Note: While in the 30-day evaluation mode:

  1. 🔗all optional equipment drivers and modules (e.g. Road, BIM, Hybrid+, etc) will operate, and,
  2. 🔗raw measurements and point data will be recorded until the 30-day evaluation limit is reached, and,
  3. 🔗unless otherwise extended or registered with a full use serial number, SurvPC will revert to the 15-point limit demo mode, and,
  4. 🔗all data will be restored for full use once a serial number has been supplied and registered.