The PD Placement user interface is organized into the following views
The Info View lays out valuable information in text form at the top of the screen. There are three boxes that can be filled with up to 4 lines of text each. The information shown can be customized or can be set via 3 presets (Simple, Standard, Complex). Text information like Pile ID, Pile Type, and RTK quality can be shown here.
The 3D View is the world view of the project. Project files like linework and pile designs will show on the screen with the current vehicle position. The view can be operated in 3D mode which will show everything in a 3D world, or it can be operated in 2D mode which will show everything from top-down planview perspective.
The Target View shows navigational information for the currently selected pile design. The crosshairs represent the current target position and the center circle is the current pile design position. When aligned in tolerance, the crosshairs will turn green. The outside target circle is representative of two feet radius around the target position. The slider at the top of the view is the Azimuth Slider. It shows the current azimuth’s relation with the target azimuth of the pile.
The Status Bar shows indicators for current statuses and other useful information. Indicators for GPS status (satellite icon) and streaming (Carlson icon) are shown. Clicking on these icons will take you to the appropriate Monitor page. For PD Placement, the current project and the current working pile folder will be shown as text. In the case of an error (RTK lost lock, No Sensor Data, No Vermeer Connection, etc), the status bar will turn red with the text of the error.
The toolbar contains a dynamic selection of buttons used to operate grade. The buttons that appear in the toolbar may change with the context of the program. In Grade's main view, the toolbar buttons shown can be customized. To change which buttons appear in the Grade toolbar, refer to Grade's Toolbar Settings
The Monitor View shows useful information for troubleshooting Grade and GNSS equipment.